Saturday, July 26, 2008

UG license installation error solution

If u have question?

Licence Server not Found.

License server not started yet.

UG FLEXlm Error.

UG Installation error.

UG license installation error.

Unigraphics initialization error.

Then u reached at right place, here is the solution for these errors........if in doubt please feel free to ask....

copy license file in your installation directory.

C:\Program Files\UGS\UGSLicensing\

right click on My Computer ->Properties-> advance tab -> environment variables.
click on new tab

in variable name write ------UGII_LICENSE_FILE

in variable values write HTML clipboard-----27000@COMPUTER

then open your lmtools.exe from licensing tool. then

1. click on configure using services.

2. then click on menu: start/stop/reread

3. then stop running server

4. then again click on service/license file menu

5 select configuration using license file.

6. click on browse and select the file copied lic file

C:\Program Files\UGS\UGSLicensing\nx4.lic

7. then again click on configuration using services.

8. click on start/stop/reread menu

9. click on start server.

its done.

If facing problem in downloading anything try this.......

Internet Download Manager


78 comments:

  1. AnonymousJuly 31, 2008 at 5:51 AM

    hi,
    maybe you could help me'
    I tried to install patran-nastran 2005.
    when I ipconfig my computer, I get computername, ethernet address and IP.
    I have tried to edit licence.dat as below:

    SERVER 001921e538de ANY 1700
    DAEMON MSC C:\flexlm\msc.exe
    FEATURE ABS MSC 2004.0999 31-dec-2019 99 C7F4CF558D56 ISSUER=ROR \
    SN=1272467-3A3E3AF6FCE2C85F8742
    FEATURE ACIS MSC 2004.0999 31-dec-2019 99 F06B09344A45 ISSUER=ROR \
    SN=1072400-8B72E41C49D5B2B25746
    FEATURE ACIS_NAME MSC 2004.0999 31-dec-2019 99 78D7DB209BCA \
    ISSUER=ROR SN=1296724-FC8DA9FD8E899967E16D
    .....


    where 001921e538de is my Ethernet address it keeps telling me

    "Your request to run MSC.Patran has been denied.
    Server node is down or not responding"

    though it says "Server Start Successful" when I start it in lmtools.

    with computer name insteat of Eth, address it says that license.dat is wrong. so, what should I put as hostname?
    could you help me?
    thank you.

    ReplyDelete
  2. AnonymousAugust 1, 2008 at 4:08 AM

    "SERVER ComputerName ANY 1700@ComputerName" worked. thank you.

    ReplyDelete
  3. AnonymousSeptember 6, 2008 at 3:21 PM

    Hi.
    I hope you can help me. I installed NX4 and even tried NX5, but neither of them will work. I have edited the licens as followed in NX5:

    SERVER monster ID=20070424 28000
    VENDOR ugslmd

    then I start the lmtools and go using the licensfile, but when i then go to the tab, start/stop/reread, lmtools crashes. And the log file in UGSLicensing i saying the it could not open the port lstet in the licensfile.

    So I realy hope you can help me.
    I am using XP PRO SP3.

    ReplyDelete
  4. AnonymousSeptember 6, 2008 at 3:31 PM

    Hi, me again, I just want to tell that I am dualbooting with vista on a second harddrive. Dont know if this has anyting to say.

    ReplyDelete
  5. Chander PalSeptember 10, 2008 at 12:23 AM

    Hi.
    Anonymous......

    I was out of station from last 4 days,so here is solution for ur problem....

    u r using ur lic. file like this

    SERVER monster ID=20070424 28000
    VENDOR ugslmd

    reinstall lic. server and use the lic. file during installation.

    before installation edit lic. file like this.....

    SERVER ComputerName ANY 17000@ComputerName

    if u don't know how to find out computer name then
    for computer name and other details visit my Computer Host ID post.....

    ReplyDelete
  6. AnonymousOctober 23, 2008 at 6:09 PM

    I have tried to install NX6 with changed licenced file:

    SERVER ComputerName ANY 17000@ComputerName

    Also I have put system variables.

    When I want to run the LMTOOLS using licence file I see in the ugslicencing.log following error:

    14:33:16 (lmgrd) The license server manager has found no vendor daemons to start
    14:33:16 (lmgrd) (There are no VENDOR (or DAEMON) lines in the license file),
    lmgrd exiting.

    ReplyDelete
  7. Chander PalOctober 24, 2008 at 10:43 PM

    hi anonymous u are trying to install UG NX6.
    first of all port value is 27000 not 17000......

    here the port value is changed from 27000 to 28000 in UG NX5 and NX6.

    u can check my this post for NX5 & NX6

    http://cadhelpcenter.blogspot.com/2008/10/ug-license-server-error-in-ug-nx5-and.html

    and all of u please leave ur name.....

    and avoid anonymous ....so i can leave solution for that particular friend....

    have a nice day......

    ReplyDelete
  8. AnonymousNovember 7, 2008 at 2:01 PM

    Hi
    I am trying to install NX 4.0 on a Win 2008 Std Server and I can't. When it reaches the part with "starting services" I get an error saying that the licence server can't be started and "Verify that you have sufficient privileges to start system services". I am logged as administrator and in Local Security Policy -> Local Policies -> User Rights Assignement I have set up the admin account to be able to do almost anything (except the 4 lines that start with deny).

    ReplyDelete
  9. AnonymousDecember 30, 2008 at 6:24 PM

    i have installed UG NX6 but when i start , geting these error.even i set environment variable but still have these problem. please help me

    NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVER
    to be configured properly.it can either be set to the value port@hostname of the
    NX license server or it can be set to point directly to a license file.
    by default it will be of the form 28000@servername.

    regards
    praveen

    ReplyDelete
  10. Chander PalDecember 31, 2008 at 3:17 AM

    Hi Anonymous,

    check port value in your lic. file and environment variable the first 2 lines should be like this.

    SERVER host ID=20080618 28000@host
    VENDOR ugslmd

    here host means your computer name.

    have a nice day.

    ReplyDelete
  11. AnonymousDecember 31, 2008 at 5:55 PM

    HAPPY NEW YEAR MASTERMIND
    please help me.

    I REMOVED UG NX6 AND REINSTALLED LISENCE SERVER AND NX 6. BUT STILL FACING TROUBLE. NOW ERROR SHOWING AS BELOW -
    "NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
    THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

    please help me and advice how to installed. if possible please mail me complete installation step. my mail id - praveen_roy@hotmail.com

    regards
    praveen

    ReplyDelete
  12. AnonymousJanuary 5, 2009 at 1:13 PM

    hi

    please help me. i am again facing problem. cant abt le to run UG NX6.

    in lic file i changed first two lines as below -
    SERVER this_host ID=20080618 28000@praveenroy
    VENDOR ugslmd
    praveen roy is my computer name.
    after that i installed liscense server then installed NX 6.
    In environmental variable -
    have set VARIABLE NAME - UGII_LICENSE_FILE
    VARIABLE VALUE -28000@praveenroy.
    but still getting error message as below -
    "NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
    THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

    ReplyDelete
  13. Chander PalJanuary 6, 2009 at 3:04 AM

    Hi SKY,

    in lic file u have changed first two lines as below -
    SERVER this_host ID=20080618 28000@praveenroy
    VENDOR ugslmd
    praveen roy is my computer name.

    lets change them with this.

    SERVER praveenroy ID=20080618 28000@praveenroy
    VENDOR ugslmd

    and enjoy.

    have a nice day.

    ReplyDelete
  14. AnonymousJanuary 6, 2009 at 5:33 PM

    hi

    i changed in lic file as your instruction but still getting error message -
    "NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
    THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

    Please Help me. i want to run NX6 in my system.

    ReplyDelete
  15. AnonymousJanuary 6, 2009 at 6:12 PM

    Thnak you sir very much . now NX6 working. i had made some mistake. thanku for helping me.

    ReplyDelete
  16. UnknownJanuary 15, 2009 at 7:15 PM

    i have installed UG NX6 with the following lines in license file

    SERVER ekco ID=20080618 28000@ekco
    VENDOR ugslmd
    ekco is my computer name

    but still getting the message:

    NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVER
    to be configured properly.it can either be set to the value port@hostname of the
    NX license server or it can be set to point directly to a license file.
    by default it will be of the form 28000@servername.

    I have checked the log file, it gives the message:-

    pid 1260
    The TCP port number in the license, 28000, is already in use.
    Possible causes:
    1) The license server manager (lmgrd) is already running for this license.
    2) The OS has not "cleared" this port since lmgrd died.
    3) Another process is using this port number (unlikely).
    Solutions:
    1) Make sure lmgrd and all vendor daemons for this
    license are not running.
    2) You may have to wait for the OS to clear this port.
    (lmgrd) Retrying for about 5 more minutes
    (lmgrd) Still trying...
    (lmgrd) Still trying...
    (lmgrd) Still trying...
    (lmgrd) Failed to open the TCP port number in the license.

    Please help!!!!

    ReplyDelete
  17. Chander PalJanuary 16, 2009 at 9:19 PM

    Hi pahuljot,

    Check my new post regarding port setting for UG.

    Have a nice day.

    ReplyDelete
  18. UnknownJanuary 26, 2009 at 1:01 AM

    I trying to install nx5 .
    i have followed all the steps including setting environment variables but still it shows error set to wrong host or lic server not found. in licensing log file it states
    21:14:36 (lmgrd) pid 1380
    21:14:36 (lmgrd) Failed to open the TCP port number in the license.
    i am installing UG in win xp.

    please help to solve this.

    Thanks
    Nilay

    ReplyDelete
  19. UnknownFebruary 5, 2009 at 9:04 AM

    hi, can u help me install nx5 please? so i edit lic. like this:
    SERVER Laptop ID=20070424 28000
    VENDOR ugslmd

    Laptop is my computer name. so i install ugs license. then i try to install nx5 but when it says write your hostname or something like that, i write:
    28000@Laptop

    and then i press next and it says server license could not be found. so what am i doing wrong?

    ReplyDelete
  20. Chander PalFebruary 5, 2009 at 10:43 PM

    Hi Jesus Ernesto,

    please describe your issue clearly, because i have already posted solution related to your problem.

    ReplyDelete
  21. UnknownFebruary 6, 2009 at 12:40 AM

    hi chander, this is what i've done. first i installed UGS licesing and the license file that i used said this:
    SERVER Laptop ID=20070424 28000
    VENDOR ugslmd

    Laptop is my computer name. so i installed ugs license with no problem. then i try to install nx5, when it says write your hostname or something like that, i write:
    28000@Laptop

    and then i press next and a message appears saying that server license could not be found. is that normal?

    i've already done this http://cadhelpcenter.blogspot.com/2008/07/ug-license-installation-error-solution.html

    this is what happened after i restarted my laptop. i tried to open NX5 and it said something about nx license error: unknown error code.

    then i went to where all the bundles are and added one and tried again to open nx5 but still that same unknown error message appeared. can u please help me?

    ReplyDelete
  22. UnknownFebruary 9, 2009 at 8:15 AM

    Hello,

    First of all thanks in advance for any help you are able to offer me. I've read through every page on your blog regarding installing NX5, and I cannot seem to get it working.

    The first three lines of my license file read:

    SERVER KrishanENGPC ANY 28000@KrishanENGPC
    VENDOR ugslmd
    DAEMON uglmd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\uglmd.exe"

    where 'KrishanENGPC' is my computer name.

    I have the server running in lmtools, and I also have all of the settings under the 'Config Services' tab exactly as you have them on your blog page.

    I also have the environment variable running as;

    Variable name: UGS_LICENSE_SERVER
    Variable value: 28000@KrishanENGPC

    The error message I receive now is:

    Initialization error-
    NX License Error: The desired vendor daemon is down [-97]


    please help, thanks!

    ReplyDelete
  23. Chander PalFebruary 9, 2009 at 10:26 PM

    Hi krishan,

    here u made error in third line of your lic. file.Because their is not any file in UG NX 6 in the provided path like
    "C:\Program Files\EDS\License Servers\UGNXFLEXlm\uglmd.exe"

    so correct your license file like this:

    SERVER KrishanENGPC ANY 28000@KrishanENGPC
    VENDOR ugslmd
    DAEMON ugslmd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\ugslmd.exe"

    if problem not solved then change like this:

    SERVER KrishanENGPC ANY 28000@KrishanENGPC
    VENDOR ugslmd
    DAEMON lmgrd "C:\Program Files\EDS\License Servers\UGNXFLEXlm\lmgrd.exe"

    hope that your problem will solve.

    ReplyDelete
  24. madmanmauFebruary 11, 2009 at 8:04 PM

    Hi Chander Pal!
    I'll hope you can help me.....I installed ansys 10.0 without problems, then I installed UGS5...without problems too.
    Somehow UGS interfered with the license of ansys and now the ansys license manager wont start up. When I try to wizard the licence file an error displays that it can't find the correct path.
    When I try to make changes inside lmtool, im not able to do it.
    I tryed to instal and unninstall both programs several times in order to reboot every registry and the same error keeps poping out. I also tryed cleaning the entire windows registry fromo both ugs and ansys entries, I manage to do it but when I re-install ansys the same error comes out.
    I installed both programs in several computers, only one has this problem....dont now what else I can do.
    Hope you can help me!!
    greetings.

    ReplyDelete
  25. Chander PalFebruary 12, 2009 at 9:38 PM

    Hi madmanmau,

    Dear first of all there is not any chance of interfering of two licenses (UG+Ansys).

    this all is because of any other error either of your pc or may be any software.

    first of all check that the ports used in UG and Ansys are only used by the respected programs.

    and then check that both of the license servers are running properly or not?

    here the good thing is that the license configuration and port setting and other procedures are same in both software.

    so you please read the releted posts and then reconfigure or reinstall both licenses again.

    hope that your problem will be solve..........if not then write back here.....

    have a nice day.

    ReplyDelete
  26. madmanmauFebruary 17, 2009 at 2:13 AM

    Thanks Chander Pal! That must be be the problem.......how should I enter the new variable?

    in variable name write ------ANSYS_LICENSE_FILE

    in variable values write -----1055@COMPUTER Name

    I'm using ansys 10.0, 1055 is the number entered in the license. Also there are already this variables:

    ANSYS_SYSDIR
    Intel

    ANSYS100_DIR
    C:\Archivos de programa\Ansys Inc\v100\ANSYS

    ANSYSLIC_DIR
    C:\Archivos de programa\Ansys Inc\Shared Files\Licensing

    CADOE_DOCDIR100
    C:\Archivos de programa\Ansys Inc\v100\CommonFiles\help\en-us\solviewer

    CADOE_LIBDIR100
    C:\Archivos de programa\Ansys Inc\v100\CommonFiles\Language\en-us

    Should I modify any of them instead? or exactly how do I enter the new one?

    Thanks Again Chander!!

    ReplyDelete
  27. CHAIFebruary 18, 2009 at 4:45 AM

    Hi, i am also facing the problem same as sky. Anyone can help me? Thanks.

    ReplyDelete
  28. AnonymousFebruary 26, 2009 at 2:50 AM

    Hello and thanks in advance for your time.
    I've got the same error message as SKY (and CHAI):
    "NX License Error: Invalid (Inconsistent) license key or signature.
    The license key/signature and data for the feature do not match"

    I changed the license file in the way you indicated:
    SERVER asus1 ID=20080618 28000@asus1
    VENDOR ugslmd

    (asus1 is my computer name).

    And the variables have been setted as you say.

    Any further ideas, please? Thanks a lot, Davide

    ReplyDelete
  29. UnknownMarch 4, 2009 at 5:32 AM

    Hey ChanderPal

    First of all, thanks again for trying to help, however that has not rectified the situation.

    There is no such directory as C:\Program Files\EDS\... on my computer.

    Rather, the files ugslmd.exe and lmgrd.exe are located in a folder called C:\Program Files\UGS\UGSLicensing

    This same folder has my ugs1.lic file.

    Right now the first three lines of my license file look like this:

    SERVER KrishanENGPC ANY 28000@KrishanENGPC
    VENDOR ugslmd
    DAEMON lmgrd "C:\Program Files\UGS\UGSLicensing\lmgrd.exe"

    I also tried to use the ugslmd.exe file, but it has also not worked. when I use the "Perform Status Enquiry" tool in LMTOOLS I get the following:

    --------
    Status
    --------
    Flexible License Manager status on Tue 3/3/2009 19:00

    [Detecting lmgrd processes...]
    License server status: 28000@KrishanENGPC
    License file(s) on KrishanENGPC: C:\Program Files\UGS\UGSLicensing\ugs1.lic:

    KrishanENGPC: license server UP (MASTER) v10.8

    Vendor daemon status (on KrishanENGPC):

    ugslmd:
    For further information, refer to the FLEXnet Licensing End User Guide,
    available at "www.macrovision.com".
    lmgrd:
    For further information, refer to the FLEXnet Licensing End User Guide,
    available at "www.macrovision.com".

    Feature usage info:

    Users of server_id: Cannot get users of server_id: No such feature exists.
    Feature: server_id
    License path: 28000@KrishanENGPC
    FLEXnet Licensing error:-5,222

    and the same error (-5,222) continues for each feature.

    Any ideas? Thanks again

    - Krishan

    ReplyDelete
  30. AnonymousMay 6, 2009 at 3:25 AM

    HI ALL!!
    This solution dont work for me.
    I use Nx6 soo long but now i have to format my computer... and i cant run Nx6...

    "NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
    THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

    before format computer everthing is good..

    Solutions for this??

    Best regards

    ReplyDelete
  31. rakshinMay 23, 2009 at 12:11 PM

    hey please help me out , i have installed ansys 10 and iam not able to run it, some license problem
    can u please give step by step procedure for cracking this....please urgent

    ReplyDelete
  32. AnonymousMay 23, 2009 at 12:33 PM

    hi this is naga , iam also having the same problems with ansys 10, the error its showing is

    Product : ANSYS Multiphysics (feature 'ane3fl')
    checkout failed for the above product
    FLEXIM error message :
    no such feature exists . (-5,414)

    server/license files searched :
    1055@__________

    please help me out soon sir!!!

    ReplyDelete
  33. AnonymousMay 23, 2009 at 12:38 PM

    hey i forgot to mention that i have followed the instructions u mentioned and it showed server start sucessful !!
    but still the above problems is existing
    naga

    ReplyDelete
  34. stjohnJuly 1, 2009 at 9:29 PM

    Hi Guys,
    does anyone have this version of NX6 working on vista? I have followed the correct install procedure and when I check with lmtools everything appears to be in order but when I start up NX6 I get the toolbar icon and nothing else, it just appears to hang.

    The strange thing is that at first I was also using NX5 (I wanted to upgrade) and did not read all the NX6 install instructions. I simply installed it and was using the NX5 license file. It worked at first but when I rebooted stopped working...

    With regards to another users posting I do not think the install will work if you also have solid works on the box. There is a flex license manager conflict. You can check this via lmtools.

    many thanks!

    ReplyDelete
  35. balajiJuly 13, 2009 at 1:42 PM

    hi,
    maybe youcould help me
    i tried to install NX5 in my system
    after installing when i tried to open it says
    NX License Error: Unknown error code
    In license file i have edited like this
    Server (Host name) ID=20070424 28000
    For Host name I have given my Computers Host name
    Could you help me?

    ReplyDelete
  36. AnonymousAugust 8, 2009 at 3:13 PM

    Can anyone send UGS NX 4.0 Licence file...

    ReplyDelete
  37. CAD Help CenterAugust 8, 2009 at 11:27 PM

    Hi Anonymous,
    I think you to contact to Siemens
    for license.
    you have to buy one for yourself.
    for your info you can contact here if you are in India near NCR:

    Siemens PLM Software

    Tower D, 16th Floor,

    Global Business Park,

    Gurgaon - 122 002

    Haryana,India.
    Board : +91 (124) 409-2244

    Direct : +91 (124) 409-2288
    Fax : +91 (124) 409-2211
    Hotline: 1800-102-4822

    www.siemens.com/plm

    Have a nice day.

    ReplyDelete
  38. AnonymousOctober 15, 2009 at 5:24 PM

    Hi Sir,

    Ive got problem when Install NX6.. I tried follow your instruction including check the comment.
    1. Variable name: UGS_LICENSE_SERVER
    Variable value: 28000@ricky
    (Ricky is my host name)
    2. SERVER ricky ID=00163640FD2E 28000@ricky
    VENDOR ugslmd
    3. Run the lmstools
    First steps, you said start/stop/reread. -> I see a message unable run the server (I guess this is the problem)
    Second steps, after locate the copy of the license, I run again the start Server,the message said server run successfull.
    4. But, I open again NX6, it still won't run.

    The problem still exist :
    "NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE UGS_LICENSE_SERVER
    to be configured properly.it can either be set to the value port@hostname of the
    NX license server or it can be set to point directly to a license file.
    by default it will be of the form 28000@servername."

    Can you help me sir, because i need it for my bachelor scription??Thanxs be4 sir..

    Best Regards,
    RF

    ReplyDelete
  39. AnonymousOctober 15, 2009 at 5:26 PM

    Btw sir, if you don't mind send the answer to my email win_juve@yahoo.co.id.. Thnxs alot sir..

    ReplyDelete
  40. AnonymousOctober 16, 2009 at 12:30 PM

    Hi,

    Do you have a suggestion to my problem sir...
    I tried follow your instruction for using LMTOOLS for NX6 license error, but there is a message which write like this :
    1. In "Server Diags" Tab :
    ERRORS: C:\Program Files\UGS\UGSLicensing\ugs2.lic:line 16:Invalid license file syntax.
    License path: C:\Program Files\UGS\UGSLicensing\ugs2.lic;
    FLEXnet Licensing error:-2,40027

    I've checked the line, it's go to Server ricky ID:00..... Vendor ugslmd

    2. In "Server Status" Tab:
    [Detecting lmgrd processes...]
    Error getting status: Invalid license file syntax.
    License path: C:\Program Files\UGS\UGSLicensing\ugs2.lic;
    FLEXnet Licensing error:-2,40027

    In window :
    NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENTAL VARIABLE ugs_LICENSE_SERVER
    to be configured properly.it can either be set to the value port@hostname of the
    NX license server or it can be set to point directly to a license file.
    by default it will be of the form 28000@servername.

    License before Error :
    SERVER YourHostname COMPOSITE=B17E62xxxxxx 28000
    VENDOR ugslmd

    License Editing I've tried to repaired :
    1. (First Step) Server ricky ID=20091015 28000@ricky Vendor ugslmd (Ricky is my Host name)
    2. (Second Step) SERVER YourHostname COMPOSITE=9B2935xxxxxx 28000
    VENDOR ugslmd

    Result still same "Error syntax". This is happen after I format my PC. I have tried follow your instruction in this blog, but result still same. Any suggestion sir?? If you don't mind, please send the suggestion to my mail. Thanxs be4 sir...

    Best Regards,
    RF
    (win_juve@yahoo.co.id)

    ReplyDelete
  41. CAD Help CenterOctober 21, 2009 at 11:13 PM

    Hi ricky,

    i was out of station.......
    so for your problem you need to set environment variable properly and you need to add the port 28000 in exceptional list of windows firewall.

    for environment variable check this post:

    http://cadhelpcenter.blogspot.com/2009/01/environmental-variable-and-port-value.html

    and to add port in firewall:

    1. open firewall.
    2. go to exceptional list.
    3. click on add port.
    4. write UGS in name and 28000 in port number.
    5. select TCP.
    6. click OK.
    7.close firewall by again click OK.

    hope that your problem will be solved.

    have a nice day.

    ReplyDelete
  42. AnonymousNovember 5, 2009 at 8:36 PM

    Hi,

    i wanted to install Nx6 too ... have made everything strict like in the manual. SERVER "Computername" .....
    Then i tried the solutions which r described here but nothing worked.
    I have Win7 64Bit ... so could it be that this is the reason why i get an Error? (NX License Error: Invalid (inconsisten) license key ...)
    hope u can help

    ReplyDelete
  43. CAD Help CenterNovember 5, 2009 at 11:44 PM

    Hi Anonymous,

    here in the post UG 6 is installed and working in Windows 7 x64 bit.

    so don't think about the version of UG and Windows.....this is fine....

    you have to check the post about:
    (NX License Error: Invalid (inconsistent) license key ...)

    you can check it here:

    http://cadhelpcenter.blogspot.com/2009/03/invalid-inconsistent-license-key-or.html

    and my request to all is please write the comments on the proper post.like issues related to windows 7 and UG are to be commented on respective post.

    and please check the comments properly because these have solutions.

    hope that your problems will be solved...have a nice day

    ReplyDelete
  44. AnonymousJanuary 8, 2010 at 9:20 PM

    i installed pro engineer wildfire 3.0 along with flexnet license server.
    the server started successfully. but when i started proE, it showed the following error.
    " error in getting license for PROE_FLEX3C, no such feature exist"

    pls help

    ReplyDelete
  45. AnonymousApril 9, 2010 at 12:13 AM

    hello how are you tnx for all topics
    pleas help me
    how can i setup nx 7 and licens
    tnx

    ReplyDelete
  46. UnknownMay 18, 2010 at 10:08 AM

    Hi,

    I have installed Ugnx5 on windows vista 32 bit, but when i start my UG it gives error
    " UNKNOWN ERROR CODE"

    any suggestion how to rectify this problem.

    Rgds
    Ads

    ReplyDelete
  47. ashboxerJuly 9, 2010 at 11:57 PM

    Hi
    I have installed NX4 on vista 32bit but I am having problem. every time I try to start nx I get an error message
    " Initialization error-
    NX License Error: the license server has not been started yet, or UGII_LICENSE_FILE is set to the wrong port@host. [15]"

    ReplyDelete
  48. AnonymousAugust 31, 2010 at 10:46 AM

    Hello
    Maybe you can help me
    I downloaded "Altair Hyperworks 10.0" from this page http://www.downarchive.com/, when tried to run the program it displays the next message:

    The desired vendor daemon is down.
    Check the lmgrd log, or try lmrreead.
    Feature GlobalGridWorksAM
    Vendor:Host: Jose
    License path: 7788@Jose, C/Altair/hw.10.0/security/altair_lic.dat
    FLEXnet Licensing error: -97,121

    I tried the others solutions in blog. I expect you can help me.

    ReplyDelete
  49. tekOctober 12, 2010 at 11:41 AM

    Hi

    I am having massive dramas with this install.

    I had had NX6 working fine with NONE of the extra steps noted in many of the posts. All the sudden, I lost a Palette and had to reinstall NX6 and now, drama.. It WILL not load with the normal error reported about lic.

    I have done all the steps outlined in these posts...nothing works..

    Any other suggestions?

    ReplyDelete
  50. avcoNovember 22, 2010 at 12:49 PM

    Hello
    Maybe you can help me
    I allso downloaded "Altair Hyperworks 10.0"
    when tried to run the program it displays the next message:

    The desired vendor daemon is down.
    Check the lmgrd log, or try lmrreead.
    Feature GlobalGridWorksAM
    Vendor:Host: Jose
    License path: 7788@Jose, C/Altair/hw.10.0/security/altair_lic.dat
    FLEXnet Licensing error: -97,121

    I tried the others solutions but nothing worked. I expect you can help me

    ReplyDelete
  51. AnonymousDecember 16, 2010 at 11:52 AM

    Is there anymore information you can give on this subject. It answers a lot of my questions but there is still more info I need. I will drop you an email if I can find it. Never mind I will just use the contact form. Hopefully you can help me further.

    - Robson

    ReplyDelete
  52. AnonymousMay 3, 2011 at 12:45 PM

    I like to spend my free time by reading varied web sites and today i came across your blog and I believe that it is one of the best free resources available! Well done! Keep on this quality!

    ReplyDelete
  53. AshwikMay 16, 2011 at 9:12 PM

    I get the following error when trying to open NX6 after installation.
    "The license key/signature and data for the feature do not match".
    I installed this on windows xp mode installed on windows 7.


    SERVER ashwik ID=20080618 28000@ashwik
    VENDOR ugslmd
    PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \


    Please help. It is very urgent. Am stuck with this since 3 days...

    ReplyDelete
  54. AnonymousMay 23, 2011 at 6:43 PM

    For Patran 2005 license.dat
    "SERVER ComputerName ANY 1700@ComputerName" worked for me, too! Just had to click on the start server button again :) Thanks!!

    ReplyDelete
  55. AnonymousJune 15, 2011 at 4:55 PM

    installation procedure of Tekla Xsteel , it would be great,, thanks in advance.........

    ReplyDelete
  56. varun singhDecember 12, 2011 at 9:52 AM

    hi
    iuse NX5 ON WIN7 PLATFORM. AFTER INSTALLATION THE SOFTWARE WAS WORKING PROPERLY BUT AFTER I RESTARTED MY COMPUTER, THE ERROR MESSAGE "SERVER NODE DOEN OR NOT RESPONDING( ERROR CODE -96) SHOWS UP. I TRIED CHANGING THE ENVIRONMENT VARIABLES TOO BUT FOUND THEM TO BE CORRECT. NEED SOME HELP PLZZZZZ

    ReplyDelete
  57. varun singhDecember 12, 2011 at 9:54 AM

    hi,
    i recently installed NX5 on win7 platform. after the installation the program ran correctly but after i rebooted my system it has been constantly giving the error " server node down or not responding ( error code: -96). i tried changing the environment variables but i found them to be correct. please suggest something.

    ReplyDelete
  58. haaloDecember 14, 2011 at 10:08 AM

    I need immediate help!!!!

    I got a new job and i need to know NX6 I-DEAS.

    I spent few days to install this software and could not.

    Pl send a detail instruction from the starting so that I can install this software. I went thru this blog and seems to me here all of you are very upto date and have good knowhow. Please help me out as soon as possibel.

    I install this software but it said "license daemon not found" I think I am doing mistak from step ONE. please help me out.

    Thanks..

    ReplyDelete
  59. haaloDecember 14, 2011 at 10:11 AM

    i need immediate help please

    can anyone help about how to install nx6 i-deas software??
    i need step by step instruction as i never install software like this.

    however, i tried but error: lincense daemon not found"

    pl help me immediately..
    tahnks in advance

    ReplyDelete
  60. AnonymousDecember 16, 2011 at 9:22 PM

    after installing NX6,when i try to extrude a cylinder solid model not appering.hollow portions are appearing.planes also not highlighting.please help

    ReplyDelete
  61. saiDecember 19, 2011 at 8:59 PM

    please help me

    after installation of nx6
    getting error message as below -
    "NX LICENSE eRRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
    THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

    my mail id saikrish.36@gmail.com

    ReplyDelete
  62. TusharSeptember 8, 2012 at 9:09 PM

    I did all the processes as explained above bt still having problem wid NX 6. Plz help me out.
    Tushar

    ReplyDelete
  63. I HATE........October 27, 2012 at 7:14 PM

    I followed the steps given, but after trying to start the server it says:Server Start Failed. The Server May Already Be Running!!
    please help!

    ReplyDelete
  64. rakujinNovember 29, 2012 at 1:17 AM

    i'm using patran 2012 64 bit. when i analyze my model there's window that show some warning like >> "Your request to run Patran Nastran Preference has been denied. Feature was never checked out."
    i tried your solution but i change 'UG' with 'LM'. thanks man, you are my savior today. may God bless you.

    if anyone have some problem like mine when using patran you can contact me platinumrakujin@gmail.com

    ReplyDelete
  65. gsquaresMarch 31, 2013 at 10:52 PM

    hi...my error is!!!
    "NX requires a server_id feature in the license file" can anyone help me out?? plzz

    ReplyDelete
  66. Aditya KFebruary 20, 2014 at 12:54 AM

    I Want Install Nx6. But When I Start Ugs Licensing Then Following Message Shown error.
    ugslmd failed to star. please verify that.
    Please Help Me

    ReplyDelete
  67. CAD Help CenterFebruary 20, 2014 at 9:34 PM

    Dear Aditya,
    see the installation guide of UG NX 6 and other article. If problem not solved then completely uninstall UG and then do a fresh install as per UG NX 6 installation guide.

    ReplyDelete
  68. UnknownApril 9, 2014 at 3:04 PM

    when i run the NX4 software this error message comes please give me the solution for the same

    Runtime Error!
    Program: C:\Programe file\UGS\NX 4.0\UGII\ugraf.exe
    This application has requested the runtime to terminate it in an unusual way. Please contact the application’s support team for more information

    What to do i m not getting please help meeeeeee

    ReplyDelete
  69. Ashwin DonMechJuly 6, 2014 at 11:55 AM

    I am Ashwin. i get the error NX requires a server_id in the license file/ i installed NX7.5 in windows 8 64bit. anyone who found a solution, please help.

    ReplyDelete
  70. UnknownJuly 1, 2016 at 8:56 PM

    hi i am chitrang i got the error NX requires a server_id in the license file, i install NX8.0 in win7 64bit pls help

    ReplyDelete
  71. UnknownMarch 22, 2017 at 8:48 AM

    AT LAST, I FOUND THIS SIMPLE ANSWER, I REMEMBER I HAVE CHANGE MY COMPUTER NAME, AND THEN I CAN'T OPEN THIS SOFTWARE. SO THE SOURCE FROM THATS.
    THANKS BRO, NOW THE PROBLEM ARE SOLVED,

    ReplyDelete
  72. UnknownJuly 5, 2017 at 11:34 PM

    Hi wen i run nx 8.0 its showing
    nx license error: cannot connect to license server system.
    the server (lmgrd) has not been started yet, or UGS_LICENSE_SERVER is set to the wrong port@host. [-15]

    ReplyDelete
  73. UnknownSeptember 14, 2017 at 4:01 PM

    Yes. Even I got the same error on NX 9 on Windows 10.i have installed license server version higher than 7.please help.

    ReplyDelete
  74. UnknownFebruary 26, 2018 at 7:10 PM

    HI,
    I HAVE INSTALLED NX11 IN WINDOWS 8.1 64BIT. WHILE INSTALLING LICENCE SERVER IT SHOWS INVALID SERVER NAME EVEN AFTER BOTH THE NAME ARE SAME (i.e. LICENCING FILE NAME AND ACTUAL HOST NAME).

    NOW WHAT SHOULD I DO?
    PLEASE GIVE ME SOLUTION AS SOON AS POSSIBLE.

    THANK YOU.!

    ReplyDelete
  75. UnknownFebruary 26, 2018 at 7:10 PM

    HI,
    I HAVE INSTALLED NX11 IN WINDOWS 8.1 64BIT. WHILE INSTALLING LICENCE SERVER IT SHOWS INVALID SERVER NAME EVEN AFTER BOTH THE NAME ARE SAME (i.e. LICENCING FILE NAME AND ACTUAL HOST NAME).

    NOW WHAT SHOULD I DO?
    PLEASE GIVE ME SOLUTION AS SOON AS POSSIBLE.

    THANK YOU.!

    ReplyDelete
  76. UnknownFebruary 26, 2018 at 7:11 PM

    HI,
    I HAVE INSTALLED NX11 IN WINDOWS 8.1 64BIT. WHILE INSTALLING LICENCE SERVER IT SHOWS INVALID SERVER NAME EVEN AFTER BOTH THE NAME ARE SAME (i.e. LICENCING FILE NAME AND ACTUAL HOST NAME).

    NOW WHAT SHOULD I DO?
    PLEASE GIVE ME SOLUTION AS SOON AS POSSIBLE.

    THANK YOU.!

    ReplyDelete
  77. UnknownApril 26, 2018 at 10:07 AM

    nx 4 instalatio error lincese servervis down or nor responce

    ReplyDelete
  78. UnknownJune 10, 2019 at 11:38 AM

    Hi, I have installed NX10 crack in windows 10 pc. I'm unable to open the software, it shows license error: Invalid (inconsistent) license key or signature. The license key/signature and data for the feature do not match.[-8], please help me to run my software

    ReplyDelete

Before posting a comment select the appropriate post.
Please don't try to advertise here via comments. Comments having outside websites links will be spammed and deleted.