CAD Help Center

CAD Problems? Search here.........

Thursday, October 2, 2008

UG license server error in UG NX5 and NX6

Hi Friends,
One of my friends got this problem in UG license server, and asked me solution.


I am trying to install UGnx5 I keep getting the error can you help me?

Initialization error-
NX License Error: License Server node is down or not responding [-96]

What can I do? I set my environment variables to

variable name UGII_LICENSE_FILE
variable value 27000@dgkw5f64

this is in my peform enquiry

[Detecting lmgrd processes...]
License server status: 27000@DGKW5F64.
License file(s) on DGWW8F61.: C:\Program Files\UGS\NX 4.0\UGFLEXLM\ugnx4.lic:

DGWW8F61.: license server UP (MASTER) v10.8

Vendor daemon status (on DGKW5F64.):

uglmd: UP v10.

this also

FLEXnet Licensing error:-125,147



So friend here is solution for this.......
use env. variable like this in UG NX5 and NX6. Because the port value is changed 28000 from 27000.


variable name : UGII_LICENSE_SERVER

variable value : 28000@Computer Name


and rest license cofiguration process is same as in previous versions of UG.
For configuration process check my post

UG-license-installation-error-solution

56 comments:

Anonymous said...

I have tried to install NX6 and received an error when trying to open NX6.

NX Licence Error: NX requires the environment variable UGS_LICENSE_SERVER to be configured properly.

I have tried change the variable values to 28000@serverName and set it directly to C:\Program Files\UGS\UGSLicensing\License.lic. Both received the same error.

Please help. Thanks

Anonymous said...

I'm having the exact same problem and would appreciate any help.
Andy R.

Anonymous said...

Andy R again:
Just to clarify my situation a bit. I can run NX6 fine on the NX6 license server machine. LMTOOLS shows the license server up and running and shows me using a license. The problem is other client machines, with the environment variables set exactly the same as on the server, won't run NX6. What's happening? I "telnetted" and all see my server port.
I'm running NX4 also on these clients, but that has a completely different machine as the license server. Could there be a FLEXLm conflict of some kind?
Thank you,
Andy R

Chander Pal said...

Hi Das and Andy R.......
u both get same problem.......but i m not getting where u r facing problem .....r u making mistake?...because the process is allready described in my first post....for ug nx 3,4 etc....

for ug nx5,6 everything is same except port value.....

Anonymous said...

Hi master-mind,
I've been thru your post and done everything CORRECTLY there. I've had other's here check my entries to make sure everthing is right. Still my client machine(s) cannot get through.
Did you fully read my last post? When I try to open NX6 on the client machine, it tries for about 5 minutes but can't find the location defined (CORRECTLY I'll restate!). NX6 opens in 15 seconds on my machine with exactly the same variables set. The only difference is my machine is the license server.
UGS GTAC thinks it's a network problem but IT says there's nothing that should be blocking it.
Any new ideas would be appreciated as my users are getting upset.
Thank you.
andy r

Anonymous said...

BTW: I fixed the problem by changing from port 28000 to 28002 and adding an output port in the "VENDOR" line of my license.

Anonymous said...

Hi Mastermind,

I need your advised about installing nx6 student edition.
Here are the tail of comments at the debug file:
9:40:38 (ugslmd) EXPIRED: ADVDES_ug_prod_des_advisor
9:40:38 (ugslmd) EXPIRED: ADVDES_ug_smart_models
9:40:38 (ugslmd) EXPIRED: ADVDES_ug_to_dxf
9:40:38 (ugslmd) EXPIRED: ADVDES_ugopen_menuscript
9:40:38 (ugslmd) EXPIRED: ADVDES_usr_defined_features
9:40:38 (ugslmd) Server started on ok-4f4966266687 for: server_id
9:40:38 (ugslmd)
9:40:38 (ugslmd) Licenses are case sensitive for ugslmd
9:40:38 (ugslmd)
9:40:38 (lmgrd) ugslmd using TCP-port 2121
9:40:50 (ugslmd) TCP_NODELAY NOT enabled
9:40:52 (ugslmd) UNSUPPORTED: "student_edition" (PORT_AT_HOST_PLUS ) kokoy@ok-4f4966266687 (License server system does not support this feature. (-18,327))
9:40:52 (ugslmd) UNSUPPORTED: "gateway" (PORT_AT_HOST_PLUS ) kokoy@ok-4f4966266687 (License server system does not support this feature. (-18,327))
9:41:51 (ugslmd) UNSUPPORTED: "gateway" (PORT_AT_HOST_PLUS ) kokoy@ok-4f4966266687 (License server system does not support this feature. (-18,327))
9:51:12 (lmgrd) lmgrd will now shut down all the vendor daemons

9:51:12 (lmgrd) Shutting down ugslmd pid=1832 because of signal 15
9:51:12 (lmgrd) Can't connect to the license server system. Shutdown ugslmd failed.
9:51:12 (lmgrd) Cannot read data from license server system. (-16,10009:10054 "WinSock: Connection reset by peer")
9:51:12 (lmgrd) Can't shutdown the license server system. Shutdown ugslmd failed.
9:51:12 (lmgrd) EXITING DUE TO SIGNAL 15

A friend of mine succesfully intalled the license on his computer same process as what to my pc. but that errors always keep coming out.

thanks
kokoy

Chander Pal said...

Hi Kokoy,

Check my new post.

http://cadhelpcenter.blogspot.com/2008/11/download-ug-nx6-full-free-100.html

Unknown said...

I trying to install nx5 .
i have followed all the steps including setting environment variables but still it shows error set to wrong host or lic server not found. in licensing log file it states
21:14:36 (lmgrd) pid 1380
21:14:36 (lmgrd) Failed to open the TCP port number in the license.
i am installing UG in win xp.

please help to solve this.

Thanks
Nilay

Anonymous said...

Hello Chander!

My name is Albert, I try to instal NX6 I follow your post step by step (envvariable, flexlm redirection lic stop-start server....etc), however at the end i have a problem with the lic,I am not sure if I have to activate or disactivate something in windows Vista, or if is a special procedure to follow with windows vista.

Please help Albert.

Chander Pal said...

Hi Albert,

Sorry but i have not any experience of NX 5 or 6 on Windows Vista.May be this info help you, and hope that you will find solution by all the help available and if got solution please leave comment with procedure details for others.


Source:UG NX 6 Documentation.
Microsoft Vista

Microsoft VISTA has finally been released and you need to be aware that there are many differences between VISTA and previous versions of Windows including Windows XP. The migration should not be treated lightly and you should make sure you understand all the implications before migrating to VISTA. Considerations should include possible impacts to hardware and software, especially 3rd party software.

*

NX supports VISTA starting with NX 5.0.1 and there are no plans to support VISTA with any older releases of NX.
*

NX supports VISTA Enterprise and VISTA Business editions only.
*

VISTA requires considerably more resources (memory, disk, etc.) then Windows XP so it may be necessary to increase memory or disk, upgrade your graphics adapter or even replace your workstation to achieve the same performance available under Windows XP.
*

The VISTA 3D native graphics scheme (AERO) may impact your graphics performance so you may need to turn AERO off to achieve adequate performance.

The minimum recommended graphics on-board memory is 256MB and although graphics adapters with less memory will work the performance may not be adequate, even with AERO turned off. Customers with high-end graphics requirements may need to consider graphics adapters with 512MB or higher on-board memory.

Only nVidia Graphics are supported at this time. Visit the Customer Support (GTAC) Web site for details of supported hardware configurations as well as for the latest graphics drivers.

Anonymous said...

Dear All,

I have read of all your post and have been using UG since version 18, but with NX6 I still have problems.

I normally install License server and UG, but when I want to run it I get following message:

NX License Error: Invalid (inconsistent) license key or signature. The license file/signature and data of the feature do not match.

What can I do???????

Regards,
Mazo

Chander Pal said...

Hi mazo,

first tell me from where u get license file.
are u using a correct license file?

tell me.......

Anonymous said...

I am using the license file which I downloaded from the link you suggested (torrent file)

Chander Pal said...

Hi mazo,

leave the first three lines of license file you edited, so that i can check where you made error,because the same license and procedure is working with other.

have a nice day.

Anonymous said...

SERVER computername ID=20080618 28000
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \
ADVDES_drafting ADVDES_dxf_to_ug ADVDES_dxfdwg \
ADVDES_features_modeling ADVDES_free_form_modeling \
ADVDES_gateway ADVDES_iges ADVDES_nx_freeform_1 \

Chander Pal said...

HI DEAR EDIT LICENSE FILE LIKE THIS:

SERVER computername ID=20080618 28000@computername
VENDOR ugslmd



WHERE COMPUTERNAME IS NAME OF YOUR PC.

FOR MORE DETAIL HAVE A LOOK AT:

http://cadhelpcenter.blogspot.com/2008/08/computer-host-id.html

Unknown said...

CHAI:
Hi, i am facing the problem as running NX6.
NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"

Please Help me. i want to run NX6 in my system.

Unknown said...

i tried with all the helps but still i am facing same problems
NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"
what i can do the best please help me

Unknown said...

i tried with all the helps but still i am facing same problems
NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"
what i can do the best please help me
Prashanth

Unknown said...

i tried with all the helps but still i am facing same problems
NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"
what i can do the best please help me
Prashanth

Anonymous said...

Hi,

I am installing NX5 and i have completed my installation totally. Only nx5 does not want to start up, i still get an error.

NX Lincense error: unknown error code.

I have read that if this error appears that you have to go to license options to add 'ACD'. But ther is no option with that name in the list.

I do not know what to do, i hope someone can help me!

grtz! Flore

Unknown said...

Hi Master Mind this is prashanth i tried again with ur method but still i am getting same problem NX LICENSE ERRO: INVALID(INCONSISTENT) LICENSE KEY OR SIGNATURE,
THE LICENSE KEY/SIGNATURE AND DATA FOR THE FEATURE DO NOT MATCH"
And one more thing i have two computers which are connected in LAN and my domain name is PUJARI, When i check pc name in properties it shows prashanth.pujari but when i installed XP that time i gave my pc name as prashanth then what should i change in lic . file i am pasting my lic.some lines please help me. and is there any problem because of LAN to installation SERVER prashanth ID=20080618 28000@prashanth
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \
ADVDES_drafting ADVDES_dxf_to_ug ADVDES_dxfdwg \
ADVDES_features_modeling ADVDES_free_form_modeling \
ADVDES_gateway ADVDES_iges ADVDES_nx_freeform_1 \
ADVDES_nx_freeform_2 ADVDES_pstudio_cons \
ADVDES_pv_ugdatagenerator ADVDES_sla_3d_systems \
ADVDES_solid_modeling ADVDES_step_ap203 ADVDES_step_ap214 \
ADVDES_ug_collaborate ADVDES_ug_prod_des_advisor \
ADVDES_ug_smart_models ADVDES_ug_to_dxf \
ADVDES_ugopen_menuscript ADVDES_usr_defined_features" \
OPTIONS=SUITE ck=100 SIGN=1E6B24D85160
PACKAGE ADVDESX ugslmd 24.0 BC0E17025B53 \
COMPONENTS="ADVDESX_assemblies ADVDESX_drafting \
ADVDESX_dxf_to_ug ADVDESX_dxfdwg ADVDESX_features_modeling \
ADVDESX_free_form_modeling ADVDESX_gateway ADVDESX_iges \
ADVDESX_nx_freeform_1 ADVDESX_nx_freeform_2 \
ADVDESX_pstudio_cons ADVDESX_pv_ugdatagenerator \
ADVDESX_sla_3d_systems ADVDESX_solid_modeling \
ADVDESX_step_ap203 ADVDESX_step_ap214 ADVDESX_ug_checkmate \
ADVDESX_ug_collaborate ADVDESX_ug_kf_checker \
ADVDESX_ug_opt_wizard ADVDESX_ug_prod_des_advisor \
ADVDESX_ug_smart_models ADVDESX_ug_to_dxf \
ADVDESX_ugopen_menuscript ADVDESX_usr_defined_features" \
OPTIONS=SUITE ck=76 SIGN=1CCCD91207C0
PACKAGE ADV_MFG ugslmd 24.0 712F127D3EAC \
COMPONENTS="ADV_MFG_assemblies ADV_MFG_cam_base \
ADV_MFG_cavity_milling ADV_MFG_dxf_to_ug ADV_MFG_dxfdwg \
ADV_MFG_fix_axis_surf_mill ADV_MFG_flow_cut ADV_MFG_gateway \
ADV_MFG_graphical_tool_path ADV_MFG_grip_execute ADV_MFG_iges \
ADV_MFG_nc_external_program ADV_MFG_planar_milling \

Unknown said...

Hi, i have windows vista x64 and i have installed NX6 x64 and it works fine, but if i install Solidworks 2009 x64 the license of NX6 fail ! and i can´t solution this problem!...help me please!!...thanks anybody

acbabu said...

dear sir,
me too having the same problem.. i have gone through all queries and what u told i done all corrections. then also am facing same problem... plz help me..
my mail id - babuaccet@rediffmail.com & gmail.com

Chander Pal said...

HI acbabu AND Luis Enrique,
you both are having problem on windows vista...I am not sure but, thinking that either you are using a single lmgrd process for the both software's. So please check this and found the solution for the same,because i have not both windows vista as well as solidworks 2009 x64 bit.

and without these two i m unable to help you regarding this.

Sorry for this but, try to get both in future if possible then will provide solution for this in near future.

have a nice day.

acbabu said...

Dear sir,
This is my 1st three line of my license file for Ug NX 6.. and am using Xp-32bit.

SERVER this_host ID=20080618 28000
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \

In this I have edited this_host as follows,
Where tiger-07 is my host name.

SERVER tiger-07 ID=20080618 28000
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \

SERVER tiger-07 ID=20080618 28000@tiger-07
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \

SERVER tiger-07 ID=20080618 28000@tiger-07
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \

SERVER tiger-07 28000
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies

SERVER tiger-07 28000@tiger-07
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies

SERVER tiger-07 ANY 28000
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies

SERVER tiger-07 ANY 28000@tiger-07
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies

And I used my IP ADDRESS , PHYSICAL ADDRESS in place of this_host…
And also I added in 3rd line as
DAEMON ugslmd “C:/Program File/UGS/UGS Licensing/uglmd.exe”
DAEMON lmgrd “C:/Program File/UGS/UGS Licensing/ lmgrd.exe”

In environment variable I edited what u told.. but no use..
Again it showing License error..
Plz help me am totally upset installing ug.

Anonymous said...

quick question, when you say computer ID=20080616 where are you getting the 20080616 number from? I'm having problems launching NX6 and this is the only thing which I cannot find where the numbers come from.

Unknown said...

I get "NX License Error: NX requires the environment variable UGS_LICENSE_SERVER to be ocnfigured properly. It can either be set to the value port@hostname of the NX license server or it can be set to point directly to a license file. By default it will be of the form 28000@serverName." any suggestions?

acbabu said...

Dear Anonymous,
that id=20080616 will come along with crack file.. if u not have download again the crack file alone for nx 6 in torrent file download.
have a nice day.

Chander Pal said...

Hi Andy Song,

may be this post clear your confusion:

http://cadhelpcenter.blogspot.com/2009/01/environmental-variable-and-port-value.html

Have a nice day

Chander Pal said...

Hi acbabu,
you have done a great job dear, and done almost all combinations.....

but, have you replaced all the files included in crack folder with original one?

this may be a reason for error, otherwise your below setting is correct:

SERVER tiger-07 ID=20080618 28000@tiger-07
VENDOR ugslmd
PACKAGE ADVDES ugslmd 24.0 1541F688A510 COMPONENTS="ADVDES_assemblies \

and may be there is a issue releted to your computer name.

you can try to rename your computer name without any - symbol.

try with different computer name like :
tiger
tiger_07

etc.

hope that your problem will be solved.

have a nice day.

Anonymous said...

Hi Guys !
Follows thsi procedure for NX5 and NX6 Installation
1. License Server.( Modify License file as per Chander Pal'S Suggestions)

2. Install NX5/6
3. Get Cracked files and replace in installation folder accordingly !

You will find cracked files in Magnitude folder(In India).
Or google for it.

4.Start NX5/6 Cheers !



Sandeep Thakur

acbabu said...

Chander sir,
i will try by changing my computer name and come back to u soon..
i like to say 1 thing to u sir.. why cant u publish one article regards how to install UG in simple manner. and what are the errors use to come after installation & solutions for all.. so that everyone can understand easily.. bcoz in google search its very difficult to understand error solutions..

have a nice day..

acbabu said...

Dear all,
Any one can say the solution for vendor daemon is down[-97] error while installing UG 6..?
And any one say the complete procedure to install ug 6..?
mail to babuaccet@rediffmail.com or gmail.com.

Tom Gosney said...

Dear Chandler, I'm having problems with trying to install NX5 on my Windows vista system.

I have tried so many of the fixes on this blog to no effect.

The error message that I currently get is as follows:

Initialization error- NX license Error: Cannot read from license server [-16]

Can you please help me.

Thanks,

Tom Gosney (email Gozza666@hotmail.com)

Chander Pal said...

hi Tom Gosney
i have allready stated that, i have not any experience of NX 5 or 6 on Vista.
so sorry dear.......and all you readers of this blog if anyone of you have any help regarding this please leave your valuable comments please.

have a nice day.....

acbabu said...

Tom Gosney,
i dont know about vista but in xp its working. so u try in vista and see...
just copy the inner files given in crack folder and paste in corresponding folders installed in c drive.. dont edit anything in lic file otherthan HOST name.

i think it will be usefull to you..
take care.

Frank said...

hi! I'm triying to install the Linux 64 bits version of NX6 and I can't install the license server, and if I run the license server manually I get the "NX License Error: Invalid (inconsistent) license key or signature.
The license key/signature and data for the feature do not match"
I'm using a lic file from a NX6 for Windows that works on it.
I do not have any cracked file to replace here... Do you have any sugestion?
Thanks in advance.

Anonymous said...

sir
I have tried to install NX6 and received an error

lmgrd is not running: License server machine is down or not responding.
See the system adminstrator about starting the license server system, or
make sure you're referring to the right host (see LM_LICENSE_FILE).
Hostname: ENTERyourNAME
License path: 27009@ENTERyourNAME;
FLEXnet Licensing error:-96,7. System Error: 11001 "WinSock: Host not found (HOST_NOT_FOUND)"


my first line of LICENSE is
SERVER al-fazal ID=20080618 28000@al-fazal
VENDOR ugslmd
plz help me

acbabu said...

Dear all,
installation of ugnx6 in xp its working.
just copy the inner files given in crack folder and paste in corresponding folders installed in c drive.. dont edit anything in lic file otherthan HOST name.

i think it will be usefull to you..
take care.

Hix said...

Hi all,

I have installed and set-up NX6 but i cannot get the licensing to work.
I have edited the SERVER to read;
SERVER HixPC ID=20080618 28000@HixPC
I can verify using services that ugslmd is running
I have added the environment variable UGS_LICENSE_SERVER and valueC:\Program Files (x86)\UGS\UGSLicensing\ugs2.lic
this at least brought the NX6 splash screen up. However i am still getting the error message
NX Lecense Error: The desired vendor daemon is down. [-97]
From the FLEXLM log i am getting the following;
11:35:05 (lmgrd) Rereading license file... Requested from Hix@HixPC
11:35:06 (lmgrd) Reread: Started ugslmd (pid 2396)11:35:06 (lmgrd) Done rereading
11:35:06 (lmgrd) ...Finished rereading
11:35:06 (ugslmd) FLEXnet Licensing version v11.4.100.0 build 50818 i86_n3
11:35:06 (ugslmd) The vendor keys don't support vendor daemon, exiting
11:35:06 (ugslmd) Vendor keys are:
0x291f1f88
0xb0576e13
0x4fcdced1
0x8b4ffd5f
11:35:06 (lmgrd) ugslmd exited with status 43 (No license file)
11:35:06 (lmgrd) Please correct problem and restart daemons

I am running Vista x64 business
I also have Solidowrks 2009 x64 (which runs fine)but cannot get the NX6 daemon thing sorted out.
Anyone have any ideas as to what is going on here? All installation instructions were adhered to and files were copied over the the NX install directory.
This is really niggling me.....

Anonymous said...

Hi.

I had problems making NX6 working, tried many-many combinations and now it's good.
I only changed the host_id or computer name in the lic file:
SERVER zoli ID=20080618 28000
where zoli is my comp. name.

Enviroment value:
UGS_LICENSE_SERVER
C:\Program Files\UGS\UGSLicensing\nx6.lic

And in the LMtools I stopped the License Server then Started it again like one of you on this forum said.
It didn't work yet but then I downloaded the Crack from the site, although my NX was already cracked with an older version I think. So the crack found on this page was the thing that than made my NX6 working.
Thanks all of you.

Anonymous said...

Hi,
On XP Sp3 my NX has both ugslmd and lmgrd process running (task manager), so I can run NX smoothly. But on other computer even lmgrd was running, I can't see ugslmd. Everything was sets exactly the same but NX can't find the license server because vendor daemon was down.
How to load ugslmd (daemon) so the lic server run correctly?
Please help, thanks.

Anonymous said...

Your blog keeps getting better and better! Your older articles are not as good as newer ones you have a lot more creativity and originality now keep it up!

Anonymous said...

Genial dispatch and this post helped me alot in my college assignement. Thank you on your information.

Unknown said...

Hi, cy here. Im using NX6. I have tried to use all ur method starting from config services, env variable, and then also done the service and license file procedure. but i still get the NX license error: invalid(inconsistent) license key or signature. ...

this is the 1st 2 line of my ugs2.lic:
SERVER laptop ID=20080618 28000@laptop
VENDOR ugslmd

Anonymous said...

NX6 works

tks Sandeep Thakur
i followed ur tips.
& thanks to all

Anonymous said...

I used every advice i could find for at least 20 some hours trying to install this and couldnt get NX6 to work until I used "Step by Step Installation Process of UG NX 7.0 x64 bit on Windows XP x64 bit." Same process just more info on the server part. I was able to install NX6 on Vista and Win7 32-bit using this guide. For some reason I had to open LMTOOLS as "run as administrator" even though I was on the administrative acct. But all the other directions are the same for those who are having trouble.

Anonymous said...

thanks for this tips

Anonymous said...

to anyone who sees this :

i've followed instructions and installed nx 5 but when i run it it says "NX license error : unknown error code". its so distressing after spending so much time on understanding how to install the ug .....

i greatly appreciate anyones help
"silvercode70@hotmail.com"

prasanth.N said...

I have problem while i am trying to go for Advanced simulation in NX4. The error appeares as NX LICENSE ERROR: THE MODULE nx_MASTERFEM IS NOT ON YOUR LICENSE FILE. (-18)
Can any one solve my problem.
Sorry for writing here, I didn't find location of new post.

sum12312 said...

NX Licence Error: NX requires the environment variable UGS_LICENSE_SERVER to be configured properly


What to do ? plz help

bigcobb said...

I need yousguys help
im getting the same error
NX License Error: unkown
please help I have to travle 35 mile one way to do tutorial. if I can get this thing running it will save me money and time.

thanks
biggcobb

Jager 22 said...

I am Trying To Run NX 6 on Win 7 But Cannot seem To pass the Licensing I have done Everything But it still gives me a License error is there not an easier way to get around The License ??? Kind Regards Jager 22

Anonymous said...

Check Host file 127.0.0.1 localhost