UG NX 6 INSTALLATION STEP BY STEP GUIDE IN XP x32 BIT

This tutorial is spacial for UG NX 6 (also works with UG NX 5), and describe the step by step process of license configuration and installation.

First of all let's see how to edit license file for our personal computer. This include host name and port value setting in license file.

1. Open license file with notepad.
2. Change this_host with your computer name. for example my computer name is CAD-PC. (Know your Host Name, Computer Name, Host-ID etc.)
3. Set port value 28000@Host Name.

All these are shown in picture below for example.



After completion of license file editing, start installation of UG.

• First of all start installation of license server.

• For language select English (United States) and click Next.
• Select installation folder for license server and click next. (Default is Like C:\Program Files\UGS\UGSLicensing\ ). Keep the Default.
  
• After that this will ask you the location of license file. Click Browse and select the license file which you edited and click Next.

• It will ask you to start installation. Select install.
• This will install the license server on your computer.
  

Thereafter start the Installation of Unigraphics NX 6 software :

• Click on Install NX.
• For language select English (United States) and click Next.
• During Setup type select Typical and click Next.
• Destination Folder : keep default or you can select other as you wish. click Next.
• During licensing it will ask you to enter server name. This will be like 28000@cad-pc for my PC or 28000@Your Host Name for your computer.
• If server name is correct as described above then click Next.
• For language select English or choose as per your requirement click Next.
• After that it setup will ask you to review or change the installation setting.

• If the setting is OK then click Install or if anything wrong then click back and repeat the above process to reset all. (Hope that everything will be OK)
• After installation finish run UG from program list or restart your computer and run UG from program list.
  

If you are installing from the image downloaded by torrent, you have to follow the installation steps provided with the crack, like copy the over cracked files etc.

There is nothing to do anything else, your program will work file like as shown:

ENVIRONMENT VARIABLE and Port Value Problem Solution

Hi Friends,

Here i am getting 2 or 3 mails daily regarding the problem of ENVIRONMENT VARIABLE and port value in UG NX Series (Unigraphics).

If any of you got errors listed below, than you are at right place and found solution.

Errors:

1. log file in UGSLicensing saying that it could not open the port listed in the license file.
2. NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENT VARIABLE ugs_LICENSE_SERVER to be configured properly.
3. The TCP port number in the license, 28000, is already in use.
4. FLEXnet Licensing error:-125,147

so friends there is two solutions, one for UG NX 1-4 and Second for UG NX 5-6,

For UG NX 1-4 :

right click on My Computer ->Properties-> advance tab -> environment variables.
click on new tab

in variable name write ------UGII_LICENSE_FILE

in variable values write -----27000@COMPUTER Name

For UG NX 5-6 :

right click on My Computer ->Properties-> advance tab -> environment variables.
click on new tab

in variable name write ------UGS_LICENSE_SERVER

in variable values write -----28000@COMPUTER Name

See the print screen below :

Have a nice Day :)

License Server not Found Error Solution for UG NX Series

Hello Dear All,

Again here i got mails from the blog readers having problems in installation of Unigraphics,Ansys,Pro Engineer etc.

During installation we need to configure License File via. License server installed in our Personal Computer(PC) or Laptop.

I have already posted the step by step procedure for License file Configuration here.

But either by user mistake or via improper method some of users will get the errors, that License Server not Found during configuration via lmtools.exe

So here I am posting solution for that, open lmtools.exe that will show you the following image.

At step (A) Here in this image the UGS License Server is running properly (B)

if in yours this is not, then go to step (C) and create and save a new license server.



1. Here you will see the Service Name: UGS License Server (ugslmd)

2. Click on browse and select the file lmgrd.exe in your PC : C:\Program Files\UGS\UGSLicensing\lmgrd.exe

3. Click on browse and select the license file in your PC : C:\Program Files\UGS\UGSLicensing\ugs2.lic

4. Click on browse and select the debug log file in your PC : C:\Program Files\UGS\UGSLicensing\ugslicensing.log

If debug log file is not there then create a text document and rename it with ugslicensing.log

5. Enable (Check mark) Start server at Power Up.

6. Use services same as shown.

7. Click Save Service.








Then restart the Computer and run lmtools.exe, check the status at (B) you will get UGS License Server.

Then go to my other post and configure license file via this UGS License Server.

For configuration in UG NX5 and UG NX6 click here

For configuration in UG NX4 to NX1 click here

Now enjoy and You can use the same procedure in Ansys or Pro Engineer or any other software which is using Lmtools license.


Visit to get Solution for Any kind of error related to CAD Software's.

UG license installation error solution

If u have question?

Licence Server not Found.

License server not started yet.

UG FLEXlm Error.

UG Installation error.

UG license installation error.

Unigraphics initialization error.

Then u reached at right place, here is the solution for these errors........if in doubt please feel free to ask....

copy license file in your installation directory.

C:\Program Files\UGS\UGSLicensing\

right click on My Computer ->Properties-> advance tab -> environment variables.
click on new tab

in variable name write ------UGII_LICENSE_FILE

in variable values write HTML clipboard-----27000@COMPUTER

then open your lmtools.exe from licensing tool. then

1. click on configure using services.

2. then click on menu: start/stop/reread

3. then stop running server

4. then again click on service/license file menu

5 select configuration using license file.

6. click on browse and select the file copied lic file

C:\Program Files\UGS\UGSLicensing\nx4.lic

7. then again click on configuration using services.

8. click on start/stop/reread menu

9. click on start server.

its done.

If facing problem in downloading anything try this.......

Internet Download Manager