Install UG NX 6 x32 bit in Windows 7 x64 bit.(Step by Step Guide)

From a long time the readers of CAD Help Center are still searching the solution for installation process of Unigraphics (UG NX 5 or NX 6) in Windows Vista (x32 or x64 bit).

After a long time now I have got a chance to try to install and see the errors while installation or running the UG NX 6 in Windows 7 x64 bit. I was unable to get Windows Vista to try out the UG NX 5 or NX 6, but I have seen that the Windows 7 is up-gradation in Windows Vista.

This is not the final version of Windows 7 but I have got a Genuine copy of this Windows 7 Ultimate x64(Check the screen shot).Can say best ever operating system till today. This is ultra fast to work like copy, paste, installation or uninstallation of a programs,Graphics and other features.



I hope that if the UG NX 6 is running in Windows 7, it will also work in Vista in both.(32 or 64 bit).And also UG NX 5 will work like this in Vista.


So here i am writing the procedure of how I install UG NX 6 and configured license file and others files.

• Mount or Open the Image in Image Drive. (like Nero or Ultra ISO)
• Auto Play will start Installation Automatically.
  
• If Auto Play will not work then open the Image Drive and Double click on Launch file.
• First of all install the License Server.(This is same as in my previous Post : See here )
• Note that in all versions of x64 bit Windows, if the software you are installing is x32 bit, this will be installed by default in Program files (x86) like. (C:\Program Files (x86)\UGS\UGSLicensing\)
• After finishing the installation of License Server click on Install NX.

• Select English(United States) as setup Language or select as of your Windows Language.
  
• Installation will begin and ask you for Setup Type select Typical and click Next.
• Choose Destination Folder as per your own choice. By default it is (D:\Program Files (x86)\UGS\NX 6.0\) . After Destination Folder selection click on Next.

• During Licensing check that the port is set at your computer name. Like 28000@Your Computer Name.(Click here to Know your Host Name, Computer Name, Host-ID)

• Select the NX Language as your Operating System or Windows Language.
• Then if you are ready to install the program click Install or if you want to modify any setting then click Back.
• This will start the installation of the program on your Computer. Just wait till the installation wizard Install UG NX 6.
• After installation finish run UG from program list or restart your computer and run UG from program list.
  

If you are installing from the image downloaded by torrent, you have to follow the installation steps provided with the crack, like copy the over cracked files etc.

• The UG NX 6 will work fine in Windows 7 x64 bit as shown below.

Hope that this will help you to run this great software in a great Windows.

Let me know if you have any issue during installation or running.

Want to make free worldwide calls. Try this.

UG NX 6 INSTALLATION STEP BY STEP GUIDE IN XP x32 BIT

This tutorial is spacial for UG NX 6 (also works with UG NX 5), and describe the step by step process of license configuration and installation.

First of all let's see how to edit license file for our personal computer. This include host name and port value setting in license file.

1. Open license file with notepad.
2. Change this_host with your computer name. for example my computer name is CAD-PC. (Know your Host Name, Computer Name, Host-ID etc.)
3. Set port value 28000@Host Name.

All these are shown in picture below for example.



After completion of license file editing, start installation of UG.

• First of all start installation of license server.

• For language select English (United States) and click Next.
• Select installation folder for license server and click next. (Default is Like C:\Program Files\UGS\UGSLicensing\ ). Keep the Default.
  
• After that this will ask you the location of license file. Click Browse and select the license file which you edited and click Next.

• It will ask you to start installation. Select install.
• This will install the license server on your computer.
  

Thereafter start the Installation of Unigraphics NX 6 software :

• Click on Install NX.
• For language select English (United States) and click Next.
• During Setup type select Typical and click Next.
• Destination Folder : keep default or you can select other as you wish. click Next.
• During licensing it will ask you to enter server name. This will be like 28000@cad-pc for my PC or 28000@Your Host Name for your computer.
• If server name is correct as described above then click Next.
• For language select English or choose as per your requirement click Next.
• After that it setup will ask you to review or change the installation setting.

• If the setting is OK then click Install or if anything wrong then click back and repeat the above process to reset all. (Hope that everything will be OK)
• After installation finish run UG from program list or restart your computer and run UG from program list.
  

If you are installing from the image downloaded by torrent, you have to follow the installation steps provided with the crack, like copy the over cracked files etc.

There is nothing to do anything else, your program will work file like as shown:

ENVIRONMENT VARIABLE and Port Value Problem Solution

Hi Friends,

Here i am getting 2 or 3 mails daily regarding the problem of ENVIRONMENT VARIABLE and port value in UG NX Series (Unigraphics).

If any of you got errors listed below, than you are at right place and found solution.

Errors:

1. log file in UGSLicensing saying that it could not open the port listed in the license file.
2. NX LICENSE ERROR - NX REQUIRED THE ENVIRONMENT VARIABLE ugs_LICENSE_SERVER to be configured properly.
3. The TCP port number in the license, 28000, is already in use.
4. FLEXnet Licensing error:-125,147

so friends there is two solutions, one for UG NX 1-4 and Second for UG NX 5-6,

For UG NX 1-4 :

right click on My Computer ->Properties-> advance tab -> environment variables.
click on new tab

in variable name write ------UGII_LICENSE_FILE

in variable values write -----27000@COMPUTER Name

For UG NX 5-6 :

right click on My Computer ->Properties-> advance tab -> environment variables.
click on new tab

in variable name write ------UGS_LICENSE_SERVER

in variable values write -----28000@COMPUTER Name

See the print screen below :

Have a nice Day :)

License Server not Found Error Solution for UG NX Series

Hello Dear All,

Again here i got mails from the blog readers having problems in installation of Unigraphics,Ansys,Pro Engineer etc.

During installation we need to configure License File via. License server installed in our Personal Computer(PC) or Laptop.

I have already posted the step by step procedure for License file Configuration here.

But either by user mistake or via improper method some of users will get the errors, that License Server not Found during configuration via lmtools.exe

So here I am posting solution for that, open lmtools.exe that will show you the following image.

At step (A) Here in this image the UGS License Server is running properly (B)

if in yours this is not, then go to step (C) and create and save a new license server.



1. Here you will see the Service Name: UGS License Server (ugslmd)

2. Click on browse and select the file lmgrd.exe in your PC : C:\Program Files\UGS\UGSLicensing\lmgrd.exe

3. Click on browse and select the license file in your PC : C:\Program Files\UGS\UGSLicensing\ugs2.lic

4. Click on browse and select the debug log file in your PC : C:\Program Files\UGS\UGSLicensing\ugslicensing.log

If debug log file is not there then create a text document and rename it with ugslicensing.log

5. Enable (Check mark) Start server at Power Up.

6. Use services same as shown.

7. Click Save Service.








Then restart the Computer and run lmtools.exe, check the status at (B) you will get UGS License Server.

Then go to my other post and configure license file via this UGS License Server.

For configuration in UG NX5 and UG NX6 click here

For configuration in UG NX4 to NX1 click here

Now enjoy and You can use the same procedure in Ansys or Pro Engineer or any other software which is using Lmtools license.


Visit to get Solution for Any kind of error related to CAD Software's.

UG license server error in UG NX5 and NX6

Hi Friends,
One of my friends got this problem in UG license server, and asked me solution.


I am trying to install UGnx5 I keep getting the error can you help me?

Initialization error-
NX License Error: License Server node is down or not responding [-96]

What can I do? I set my environment variables to

variable name UGII_LICENSE_FILE
variable value 27000@dgkw5f64

this is in my peform enquiry

[Detecting lmgrd processes...]
License server status: 27000@DGKW5F64.
License file(s) on DGWW8F61.: C:\Program Files\UGS\NX 4.0\UGFLEXLM\ugnx4.lic:

DGWW8F61.: license server UP (MASTER) v10.8

Vendor daemon status (on DGKW5F64.):

uglmd: UP v10.

this also

FLEXnet Licensing error:-125,147



So friend here is solution for this.......
use env. variable like this in UG NX5 and NX6. Because the port value is changed 28000 from 27000.


variable name : UGII_LICENSE_SERVER

variable value : 28000@Computer Name

and rest license cofiguration process is same as in previous versions of UG.
For configuration process check my post

UG-license-installation-error-solution